Outstanding Accuracy and Terminal Performance
- Patented, Tumble Upon Impact® Design
- Solid Copper match-grade projectiles
- The velocity is calculated based on the SAAMI unit using the average of 20 rounds.
Loaded as 9MM
Never load casings under 75% of available volume. (With projectile fully seated.)
| Powder Type | Max Load Grain | FPS(AVG) |
|---|---|---|
| Alliant Powder Bullseye | 5.6 | 1469 |
| Vihta Vuori N340 | 6.2 | 1465 |
| IMR HI-SKOR 700X | 4.2 | 1332 |
| Alliant Powder Red Dot | 4.4 | 1351 |
| Accurate No. 5 | 8.1 | 1469 |
| Alliant Powder Power Pistol | 7.8 | 1519 |
| Winchester Auto Comp Ball Powder | 6.7 | 1479 |
| Hodgdon Tite Group | 5.1 | 1405 |
Disclaimer
We follow the guidelines set by the Sporting Arms and Ammunition Manufacturers Institute, Inc (SAMMI) Specs in order to provide safety to our customers. Everything is measured within the tolerance of pressure and COAL set by SAMMI Specs. Never load casings under 75% of available volume. (With projectile fully seated.)
- Projectile ID:
- .355-080-SCP
- Projectile UPC:
- 753677048218
- Grain Weight:
- 80gr
- Overall Length:
- .5470
- Bullet Diameter:
- .3550
- Ballistic Coefficient:
- N/A (Pistol)
- Projectile 50 Round Box Weight:
- .80
1 Review
-
Outstanding bullet
Loaded to 1500 FPS, these will defeat THREE level IIIA body armor panels stacked on top of each other! Zips through one panel like nothing is even there and still penetrates 16" in Clear Ballistics gel with a wound channel significantly better than FMJ on bare gel. Minimal damage to the nose of the bullet even after all that. Much more reliable armor penetration than any of the solid copper designs I've tested from Lehigh Defense. Note that due to the profile of this bullet, it can't be loaded in 9x25 Dillon. I tried, but the OAL was far too long. FPS would have been incredible, but it's still very effective from 9mm.
